>

VISIT OUR FORUM

  

FZR   FZS   FX
SVHO

  
  

PARTS & ACCESSORIES

  

ISLAND RACING
FULL MOD RIDEPLATE

Additional speeds up to 3+ MPH over an unmachined OEM or AFTERMARKET rideplate.
Make no mistake! ISLAND RACING RIDEPLATES are the WORLDS FASTEST rideplates available anywhere.
WE ARE THE ORIGINATORS OF THE MODIFIED RIDEPLATES
ACCEPT NO IMITATIONS
  
FZ & FX FULL MOD RIDEPLATE 
$350.00 ( Mod Your Rideplate )
We can supply new rideplates with the mod performed avoiding inbound shipping and down time.
  
***NOTE***
ISLAND RACING'S MODIFIED RIDEPLATES ARE THE WORLDS FASTEST RIDEPLATES AVAILABLE!
RIDER TESTED AND PROVEN!

 
3M MARINE ADHESIVE SEALANT 4200 FAST CURE
06560 $29.99 White 10 Ounce
06564 $29.99 Black 10 Ounce

We all know "pump sealing" is a must on all Yamaha models for reducing cavitation and increasing performance. 3M 4200 FAST CURE is the most commonly used sealant by ALL watercraft owners and IS the recommended sealant to use for your Yamaha pump sealing needs.

AIRHEAD BUNGEE DOCK LINE
AHDL-4 $11.99 4' Stretches to 5.5'
AHDL-5 $12.99 5' Stretches to 7'
AHDL-6 $13.99 6' Stretches to 9'
  
AIRHEAD Bungee Dock Lines absorb shock to boats, cleats, docks, pylons and other hardware. The bungee cord is hidden inside the rope and acts as a built-in snubber. Two foam floats protect the boat from chafing. There's a sliding adjustment at both ends for quick docking. Recommended for docking boats and PWC's up to 3,500 pounds. Tensile strength is 2,150 pounds. Black/Blue/Red color scheme.

AIRHEAD HULL HUGR PWC FENDER
HH-P1B $21.99
  
Docking a PWC has never been safer with the introduction of the HULL HUGR PWC Fender. Engineered specifically for PWCs, it hinges in the center to better protect PWC bodies from docks designed for bigger boats. It hooks under the rub rail with a molded acetyl hook integrated into the back of the fender. If your PWC has them, you'll want to connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided. If not, simply thread the strap though the rubber block provided and place it inside the PWC's storage compartment, then shut it. The block anchors the fender strap perfectly and will not damage the body. We recommend 2 fenders per PWC. Fits all PWCs.

AMSOIL SYNTHETIC MARINE ENGINE OIL 10W-40
WCFQT $12.65
 
For use in 4-stroke gasoline fueled engines in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and "warranty certified". For use in 4-stroke outboard and marine inboard engines. Also excellent for personal watercraft.

AMSOIL OIL FILTER
EAOM134 $15.15

AMSOIL Ea® Oil Filters feature advanced full-synthetic media that traps and holds a greater amount of small, wear-causing contaminants compared to conventional filters. Efficiency is the filter's ability to capture contaminants. The more efficient a filter is, the more contaminants it will remove from the oil. AMSOIL Ea Oil Filters have one of the best efficiency ratings on the market. Ea Oil Filters provide a filtering efficiency of 98.7 percent at 20 microns.

AMSOIL DOMINATOR SYNTHETIC RACING GREASE
GRGCR-EA $14.85
 
AMSOIL DOMINATOR® Synthetic Racing Grease is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions. NLGI #2 GC-LB

AMSOIL SYNTHETIC WATER RESISTANT GREASE
GWRCR-EA $9.50

AMSOIL Synthetic Water-Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium-sulfonate complex thickeners, Water-Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water-washout and sprayoff resistance are outstanding for applications frequently exposed to water.

AQUA SPORT 2 DEGREE PUMP WEDGE
YH-16003 $85.00
  
2° pump wedge for 2008-present Yamaha 1.8L Waverunner watercraft. The pump wedge is CNC machined out of a single piece of 6061 Aluminum, finished in a black anodized coating that protects it from salt water and features a double-sided lip to retain silicone sealant and prevent cavitation. We extensively tested our pump wedge to ensure that there are no handling compromises. The pump wedge lifts the bow of your craft reducing drag and substantially improving top-speed. Product made in the USA.

AQUA SPORT ARP FLYWHEEL BOLT SET
YH-15003 $24.00
 
Custom set of ARP flywheel bolts. These bolts are forged and thread rolled after being heat-treated which provides up to 10-times longer fatigue strength. They are precision CNC-machined to exact specifications. Made from 8470 chrome moly steel, with 180,000 PSI tensile strength. Set includes 6 bolts and an instruction sheet. Fits all Yamaha 1.8L HO SHO SVHO personal watercraft.

AQUA SPORT ARP HEAD STUD KIT
YH-15001 $186.00
 
Custom set of ARP head studs. Part #: YH-15001. These studs are forged and thread rolled after being heat-treated which provides up to 10-times longer fatigue strength. They are precision CNC-machined to exact specifications. Made from 8470 chrome moly steel, with 200,000 PSI tensile strength. Set includes 10 studs, 10 12-point nuts, 10 parallel ground washers, and instruction sheet. Fits all Yamaha 1.8L Waverunner watercraft. Studs used to bolt down the cylinder head to the engine block.

AQUA SPORT BILLET MANUAL TIMING CHAIN TENSIONER
YH-10027 $100.00
  
Performance billet T6-6061 aluminum construction, anodized black finish, manual timing chain tensioner. Direct replacement for the factory automatic timing chain tensioner. Unlike the automatic factory timing chain guide, a manual timing chain tensioner will not loose it's setting and will keep the timing chain adjusted at all times. Comes with an o-ring to provide seal, no need for a gasket.

AQUA SPORT DUAL VALVE SPRING / TITANIUM RETAINER / SPRING LOCATOR KIT
YH-KIT1 $599.95
  
Our valve springs are made with premium super clean Chrome Silicon Vanadium Steel alloy for higher performance and durability at high rpm's and better memory. The valves are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme conditions. Computer software also allows us to make sure that the harmonics are well under control limits.

Our spring locators are manufactured from hardened 4140 steel alloy that not only protects the cylinder head casting and shim, but also precisely locates and holds the valve spring in place. These locators feature a CNC machined inside diameter which perfectly locates on the valve guide outside diameter with tighter tolerances than any competitor's locators. 

Our titanium retainers are made from Ti 17 or Ti 64 for the manufacturing of our retainers for excellent strength and wear resistance at 40% less weight than steel retainers. Our materials are tested and certified for chemical purity, uniform grain microstructure, and superior mechanical properties and sonically tested to be imperfection free. Precision CNC Machined.


AQUA SPORT INTAKE MANIFOLD THERMAL INSULATOR GASKET
YH-12001 $48.00
  
Yamaha 1.8L Waverunner watercraft thermal insulating intake manifold gasket. Precision cut and designed to replace the listed oem gaskets. Gaskets helps to reduce heat transfer between the cylinder head and the manifold to decrease intake air temperature, and increase horsepower. Hotter air is less dense and thus has less oxygen per given volume, so less oxygen is available for combustion robbing you of power.

AQUA SPORT INTAKE MESH DELETE RING
YH-16002 $35.00
 
Billet aluminum construction, CNC machined, anodized red finish. Replaces the mesh in the intake assembly to improve air flow and increase horsepower. Instructions included.
NOTE: Not for 2018 FX SVHO with plastic intake manifold.

AQUA SPORT OXYGEN SENSOR MOUNT KIT
YH-16005 $120.00

The kit contains a mount anodized in black (to avoid things like corrosion, and other damages), 5 bolts, 1 allen key, and gasket.

  • Replacement to OEM plug
  • Easy to install
  • Made in USA

AQUA SPORT SINGLE VALVE SPRING / TITANIUM RETAINER / SPRING LOCATOR KIT
YH-KIT3 $540.00
 
Our valve springs are made with premium super clean Chrome Silicon Vanadium Steel alloy for higher performance and durability at high rpm's and better memory. The valves are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme conditions. Computer software also allows us to make sure that the harmonics are well under control limits.
Our spring locators are manufactured from hardened 4140 steel alloy that not only protects the cylinder head casting and shim, but also precisely locates and holds the valve spring in place.   These locators feature a CNC machined inside diameter which perfectly locates on the valve guide outside diameter with tighter tolerances than any competitor's locators.
Our titanium retainers are made from Ti 17 or Ti 64 for the manufacturing of our retainers for excellent strength and wear resistance at 40% less weight than steel retainers. Our materials are tested and certified for chemical purity, uniform grain microstructure, and superior mechanical properties and sonically tested to be imperfection free. Precision CNC Machined.

AQUA SPORT THROTTLE BODY MOUNT
YH-16001 $85.00
  
Billet throttle body mount for Yamaha 1.8L Waverunner. Billet aluminum construction, CNC machined, and anodized red. Includes stainless steel bolts and washers, as well as an Allen key to tighten the mount to the intake manifold and the throttle body to the mount. Much stronger than the plastic OEM one. Replaces OEM part # 6S5-14360-00-00. Made in the United States.

AQUA SPORT TITANIUM RETAINER SET
YH-10005 $313.00
  
Intended for OEM factory springs. Retainers are manufactured with high quality military cetified Titanium alloy and precision CNC machined for a tight fit that will ensure a long durability. Set includes: 16 Titanium Retainers We use both Ti 17 & Ti 64 for the manufacturing of our retainers for excellent strength and wear resistance at 40% less weight than steel retainers. Our materials are tested and certified for chemical purity, uniform grain microstructure, and superior mechanical properties and sonically tested to be imperfection free.

AQUA SPORT VALVE SPRING LOCATORS SET
YH-10002 $106.00
  
These premium quality valve spring locators are manufactured from hardened 4140 steel alloy that not only protects the cylinder head casting and shim, but also precisely locates and holds the valve spring in place. These locators feature a CNC machined inside diameter which perfectly locates on the valve guide outside diameter with tighter tolerances than any competitor's locators. Don't compromise high quality for a low price. Features: Protects the spring pocket/shim while properly locating & holding the valve springs in place This I.D. locator is engineered with the locating shoulder on the inside diameter Designed to handle the extreme spring pressures and high RPM in racing engines Heat treated for long life expectancy. 

ATLANTIS FLOATING WRIST LANYARD
A8139 $18.95 Blue/Black
A8147 $18.95 Black/Black
A8158 $18.95 Red/Black
  • Clip apart so they can be used as wrist or vest lanyard
  • Made of polyurethane cord that floats
  • Come with one-hand easy-glide slider
  • Available in a variety of colors

ATLANTIS FLUSH KIT
A8582B $19.95

ATLANTIS PRO FLOATING WRIST LANYARD
A8130 $23.95 Black

BEL-RAY MARINE EXTREME PRESSURE WATERPROOF GREASE
99710-CG $10.95 14oz Cartridge
  
A heavy duty, premium grease fortified with Extreme Pressure additives. The addition of aluminum complex thickeners allows it to be virtually waterproof and ideal for items subject to direct contact with water. Unaffected by either salt or fresh water, it provides unsurpassed rust and corrosion protection on any treated surface exposed to harsh marine environments.

BELRAY OIL FILTER
SV57808 $8.95
 
Replaces:
Yamaha 69J-13440-00-00
Yamaha 69J-13440-01-00
Yamaha 69J-13440-03-00

BLOWSION VACATE VALVE
06-01-071 $31.95
  
A simple installation drain valve alternative for the OEM drain plug. Machined from 6061 aluminum and anodized for corrosion protection, the Vacate Valve operates using the forward motion of the watercraft and gravity to allow ingested water to simply vacate the hull in one direction only. Direct threaded replacement for the flimsy OEM plastic drain plugs, the Vacate valve also simplifies interior flushing of the engine compartment.

BOATLIFE MARINE SILICONE RUBBER
1140 $9.99 Tube Clear
1141 $9.99 Tube White
1142 $9.99 Tube Black
1150 $19.29 Cartridge Clear
1151 $19.29 Cartridge White
1152 $19.29 Cartridge Black
  
100% marine high quality silicone sealant. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure.
Excellent for sealing transom and pump sections when installing impeller.

CALIBER TRAILER BUNK SLIDES
23010 $34.95 Black
23011 $34.95 White
23013 $34.95 Yellow

Makes launching your boat or watercraft easy, slides effortlessly off bunks and into the water.
  • The new unique profile provides extra cushioning between the boat and trailer bunks.
  • Washout channels flush sand and debris off of the slides and away from the hull.
  • Safer unloading and loading because of reduced friction and stress by 400% on the trailer cranking mechanisms, ropes and hull bow hooks.
  • Allows you to unload and load your boat or watercraft in shallower water.
  • Fast and simple installation.
  • Made from a low-friction composite which is impervious to sun, weather and salt water.

CALIBER TRAILER BUNK WRAP
23050-BK $49.95
 
16' roll covers up to two 2 x 4 x 8' bunks
Replace your old ripped carpeted bunks with a smooth permanent solution.
  • Less strain on arms, ropes, pulleys, and bow eyes
  • End Caps and All Stainless hardware included
  • Bunk Wrap mounts directly over bare wood

CORROSION TECHNOLOGIES CORROSION X
90101 $11.09 6oz
90102 $20.89 16oz
  
CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look like a typical oil-based anti corrosion spray, CorrosionX utilizes a revolutionary technology called Polar Bonding that does far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. Corrosion-X actually kills existing rust and corrosion (keeping it from spreading) and provides long-term protection against rust and corrosion on any metal surface.

CRC 6-56 MULTI PURPOSE LUBRICANT
06007 $8.99
 11oz. Aerosol

06008 $49.99 Gallon

A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear & corrosion. Multi-purpose product lubricates, protects, & displaces moisture all in one.

CRC SALT TERMINATOR
SX32M $29.99
 32 Oz. with Mixer 

SX32 $17.99  32 Oz. 
SX128 $39.99 1 Gal. 

Cleans & protects anything exposed to salt ( saltwater, salt air, road salt ). Dissolves salt & leaves a protective coating to inhibit corrosion. Essential as a motor flush for marine engines in both saltwater and freshwater environments.

   
   
 
DSS YAMAHA DRIVESHAFT HOLDER
TOOL53 $32.95
 
Required tool when removing impeller from driveshaft.

ENGINE TECH 17LB SUPERCHARGER WHEEL
ET-SVHO-17 $579.00

ENGINE TECH 19LB SUPERCHARGER WHEEL
ET-SVHO-19 $699.00

ENGINE TECH 23LB SUPERCHARGER WHEEL
ET-SVHO-23 $800.00

   
FIZZLE Y1000 INTERCOOLER KIT
FF-YM-IC-0018 $999.95
  • Includes authentic TiAL or HKS (your choice) blow off valve
  • Gain 2-3+ MPH top speed over OEM Yamaha SHO or SVHO intercooler
  • Gain 200-300+ peak RPMs, acceleration and throttle response
  • Kit Contents: The intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
  • Fits all supercharged Yamaha watercraft 2008-2017, including FZR, FZS, GP1800, FX SHO and SVHO models and supercharged Yamaha Jet Boats

   
   
   
 
   
HIFLOFILTRO OIL FILTER
HF740
 $8.95

Replaces:
Yamaha 69J-13440-00-00
Yamaha 69J-13440-01-00
Yamaha 69J-13440-03-00

HOTCAMS VALVE SHIM KIT
HCSHIM02 $89.95
  
9.48mm Complete shim kit 1.20-3.50mm in .05mm increments with 3 shims in each size

HT MOTO OIL EXTRACTOR
OIL01 $65.00

Make changing the oil on your 4 stroke jetboat clean and hastle free. Holds up to 6 liters (1.5 gal) in this sturdy portable container. Pump included.

HT MOTO OIL EXTRACTOR
OIL03 $130.00

Ideal for bigger jobs and shops, this larger capacity oil/fluid extractor makes changing the oil on your 4 stroke PWC, boat, snowmobile, ATV, lawn mower, etc. clean and hastle free. Holds up to 15 liters (3.92 gal) in this sturdy portable container with built in pump.

   
ISLAND RACING
INTERMEDIATE HOUSING ASSEMBLY
IR-IHA-406 $239.95

There are many low cost ( and low quality ) intermediate housing assemblies on the market. We have yet to see one that is assembled correctly or use anything other than an inferior quality bearing.

We utilize some of the aftermarket components to keep costs down but includes the OEM Yamaha bearing to insure both reliability and durability. Each housing is assembled individually and correctly to insure a quality part.

   
ISLAND RACING
MARINE LIQUID PUMP GREASE
IR-MLPG $14.95
 6oz


We are often asked what is the BEST grease to use in jet pumps. The answer is our MARINE LIQUID PUMP GREASE. Our grease is composed of MARINE lubricants and is blended specifically for use in jet pumps. Regular grease is too thick and once "flung" off the bearings will lead to failure in short time. Our Marine Liquid Pump Gease will flow to the bearings offering unequaled PERFORMANCE and PROTECTION. Recommended for jet pumps in ALL watercraft from stock to fully modified.

ISLAND RACING
QUICK CONNECT FLUSH KIT
IR-QCFK-SE-B $54.95
( Blue )
IR-QCFK-SE-R $54.95 ( Red )

Replace, relocate or simply upgrade your leaky, worn out OEM flush assembly to our HIGH QUALITY, user friendly Quick Connect Flush Kit. Just a simple push and the couplers snap together forming a solid LEAKPROOF connection.

ISLAND RACING
PRO IMPELLER
Solas YV-CD-13/18 Based:
YV-CD-13/16-IRPRO $389.95
YV-CD-13/17-IRPRO $389.95
YV-CD-13/18-IRPRO $389.95
YV-CD-13/19-IRPRO $389.95
Solas YV-CD-13/20 Based:
YV-CD-13/18-IRPRO $389.95
YV-CD-13/19-IRPRO $389.95
YV-CD-13/20-IRPRO $389.95
YV-CD-13/21-IRPRO $389.95
YV-CD-14/19-IRPRO $389.95
YV-CD-14/20-IRPRO $389.95
YV-CD-14/21-IRPRO $389.95

ISLAND RACING
SPARK PLUG INDEX WASHER KIT
IR-SPIWK-14 $29.95

Our SPARK PLUG INDEX WASHER KIT allows you to “index” or align the direction of the electrode for more efficient combustion, HIGHER HORSEPOWER, and HIGHER PEAK RPM. Washers are made from 100% Stainless Steel and will not corrode in marine environments. Washers are reuseable.

   
ISLAND RACING
TOW VALVE KIT
IR-TVK-58 $24.95

Our Tow Valves bodies are 450PSI plated brass construction. Full flow inner diameter doesnt restrict cooling water. During towing situations, it's mandatory to shut off the inlet water hose to prevent engine damage.

ISLAND RACING
TUNNEL REINFORCEMENT KIT - FZR
IR-TRK-FZR $209.95

The ISLAND RACING TUNNEL REINFORCEMENT KIT contains the COCO Tunnel Reinforcement Skin, West System 610 Epoxy, and stainless hardware. 

 
ISLAND RACING
WATER STRAINER KIT
IR-WSK-12 $49.95 For 1/2" Hose
IR-WSK-58 $49.95 For 5/8" Hose

Our WATER STRAINER KITS are the finest kits available on the market.  Keep unwanted debris out of your engine and cooling system. Mounts in any position. Straight and 90 degree fittings allow for unlimited hose routing.  Marine grade mounting and hose clamps included. 

KLOTZ ESTORLIN RACING PERFORMANCE SYNTHETIC ENGINE LUBRICANT
KE-940 $13.99 10W/40 Quart
KE-955 $13.99 15W/50 Quart
  
• Designed for racing and performance applications
• Improves acceleration and throttle response
• Contains extra zinc and phosphorus to protect critical engine parts
• Extends cam roller bearing and flat tappet cam life
• Reduces oil out temperature
• Enhanced flowability provides Less Drag-More Power®

PURE ESTORLIN® MARINE 4-STROKE PERFORMANCE 10W/40
KE-334 $12.99
Quart
KE-335 $47.99 Gallon
  
Designed for all outboard, inboard, I/O and PWC four stroke engines
Certified warranty compliant
Provides performance advantages for leading outboard, inboard, I/O and PWC engines

 
MAXIMA PWC MARINE 4T
14901
$8.25 10w40 Liter

PWC Marine 4T is a superior product featuring advanced additive technology in the development of highly stable and long life multi-grade PWC specific oil. By using an exclusive blend of petroleum base stocks and advanced anti-wear, anti-shear additives, this product assures viscosity stability for 4-cycle engines. This formula also has extra anti-scuff additives to handle extreme loads and peak temperatures in high performance engines. Exceeds FC-W specifications and all known OEM requirements.

   
NGK SPARK PLUG
LFR7A $7.95

OPPAMA ENGINE TACHOMETER
PET-2100DXR $299.95

PARTS UNLIMITED AGM MAINTENANCE FREE BATTERY
2113-0043 $96.95 ( Yuasa Equivalent YB16CL-B )

Parts Unlimited batteries are a high-quality, low-cost alternative to OEM battery replacement
Built to the same exacting specifications and quality-control standards as top brand-name Japanese batteries
Rugged and reliable starting power for your machine
All batteries are shipped dry
Acid pack included ( UPS Shippable ) 

   
   
   
   
 
   
R&D FZR / FZS SVHO INTAKE GRATE
112-18004 $349.95

R&D FX SVHO INTAKE GRATE ( 2014 - 2018 ) 
112-18010 $349.95

 
R&D LOW FRICTION DUAL WASHER IMPELLER SPACER KIT
132-81111 $54.95
  
The R&D “Dual Washer” Impeller Spacer Kit replaces the O.E.M. single seal washer with a specifically designed and machined kit that incorporates a second low friction slip washer to be used which allows impellers to be removed with 50 percent less torque during the impeller removal process! Tired of Impellers that are so galled up that impellors have to be machined or cut off? Tired of broken impeller tools and broken vises? Install the R&D low friction “Dual Washer” Kit and impeller removal will be super easy when making impeller changes. Many SVHO owners have had these issues and have had to cut up and throw away impellers and repair damaged threads. The R&D Kit puts to end all the expensive repairs and downtime with these issues. The R&D “Dual Washer” Kit fits all Yamaha models both supercharged and N.A. from 2008 and up.

R&D RIBBON DELETE KIT 2018 FX SVHO
612-17996 $99.95
HDWR-MTA44 $27.95
 
The R&D Intake Manifold Ribbon Delete Kit was developed to increase airflow into and through the intake system by relieving restriction. The R&D Intake Manifold Sleeve replaces the OEM intake ribbon producing a 40 CFM increase in air flow. The R&D billet sleeve mounts between the intake manifold and the throttle body creating a superior Venturi effect. The R&D Intake Kit will add low end and mid range throttle response, and a full 100 plus rpms to top end performance to a stock SVHO.
The R&D Intake sleeve is an absolute must have part to remove intake restrictions before contemplating power adding compressor booster wheels or turbo charger kits to the Yamaha SVHO engine. True horsepower gains on the Yamaha start right here with the R&D Intake Sleeve. More airflow will equal more power. 
Note: The Kit comes complete with install jig to cut out the oem ribbon which is molded into the plastic manifold. A 2.750” hole saw (required) is sold separately. Order part # HDWR-MTA44

RHAAS URETHANE MOTOR MOUNT
YAM4STRMOUNT $50.00
  
These mounts are made from 6061 aluminum and anidozed for corrosion protection and a long life. The urethane is locked into the base and the threaded insert to provide a one piece, mechanical lock on all components. These mounts do not rely on glue to hold things together, the mount is molded at one time with the billet threaded insert and the billet aluminum base. These are made to the highest standards in our own manufacturing facility right here in the USA. There is 4 years of R&D that went into making these mounts the best you can buy for your Yamaha.
Motor mounts sold individually.

RIVA BILLET PUMP STRAINER
RY1013-WS-80 $89.95
 
Billet pump strainer allows installation of a second cooling line for the SVHO engine. Larger openings increase water pressure for more cooling to engine. Replaces restrictive OEM pump strainer on SVHO model.

   
RIVA FUEL PRESSURE REGULATOR KIT FZR / FZS
RY12040-RRFPR-6S5 $474.95

Riva's Fuel Pressure Regulator Kit provides the precision pressure control necessary to compliment aftermarket ECU applications on the SVHO engine. Kit is fully assembled & mounts securely on top of fuel tank via sturdy aluminum bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line that is routed through supplied rubber fuel tank cap. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank.

Key Features Include:
Precision fuel pressure control with optional rising rate function.
High quality stainless steel liquid-filled pressure gage.
Large 3/8 fuel return line.
Includes billet Fuel Pressure Regulator Block-Off.
Easy bolt-on installation with OEM fuel connectors.
Includes complete installation instructions & tuning guide.

RIVA FUEL PRESSURE REGULATOR KIT 12-18  FX
RY12070-RRFPR-6S5 $474.95

Riva's Fuel Pressure Regulator Kit provides the precision pressure control necessary to compliment aftermarket ECU applications on the FX SVHO engine. Kit is fully assembled & mounts securely on top of fuel tank via sturdy aluminum bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line that is routed through supplied rubber fuel tank cap. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank.

Key Features Include:
Precision fuel pressure control with optional rising rate function.
High quality stainless steel liquid-filled pressure gage.
Large 3/8 fuel return line.
Includes billet Fuel Pressure Regulator Block-Off.
Easy bolt-on installation with OEM fuel connectors.
Includes complete installation instructions & tuning guide.

RIVA HIGH FLOW BILLET FUEL RAIL
RY12040-BFR $259.95
 
Our High Flow Fuel Rail is an essential upgrade to your fuel system to support increased horsepower from supercharger or turbo modifications. Directly replaces restrictive factory fuel rail for improved fuel delivery and enhances the appearance of your engine bay. Precision machined billet aluminum rail features a unique bracket system that adapts to a variety of injector sizes & lengths. Large body design provides increased flow capabilities to support 500+ horsepower applications. Inlet fitting accepts OEM Yamaha fuel connector for easy plug-in installation. Includes fittings for flow-through fuel routing to eliminate injector supply fluctuation and keep fuel cooler. Can also be set up with OEM dead head routing via supplied fuel pressure gauge or plug. Constructed of 6061 billet aluminum and anodized to prevent corrosion. Includes all necessary mounting hardware and complete installation instructions.

Key Features:

  • High flow fuel delivery supports more power.
  • Fits all Yamaha OEM injectors along with RIVA 100lb Pro-Series Fuel Injectors (part# RY12040-I-KIT-100).
  • Accepts OEM Yamaha fuel connector fitting for easy installation.
  • Delivers equal fuel supply to injectors with flow-through fuel routing.
  • Billet aluminum construction and anodized to prevent corrosion.
  • Can also be used on stock engine with stock injectors for cosmetic upgrade.

RIVA MAPTUNERX YAMAHA 2009-2017 1.8L BUNDLE
RY110SC-B $1067.12 
  
The MaptunerX Bundle delivers instant plug-in horsepower!
Quickly and easily load performance tunes into your Yamaha PWC eliminating the need to ship out your ECU for programming. Features a slick, full color, touch screen display. There is no limit to the number of vehicles or tunes you can reflash with the MaptunerX. Simply purchase one additional tuning license for each vehicle that you would like to program. Includes full access to RIVA's world famous tuning library along with unmatched technical support. Easily switch between performance tunes and then back to stock settings if you wish.

RIVA PERFORMANCE BLOW-OFF VALVE KIT
RY17040-BV $379.95
  
Riva's Performance Blow-off Valve Kit improves supercharger reliability and performance by relieving unwanted pressure during off-throttle operation. Reduces supercharger clutch & gear wear and eliminates heat soak in discharge tube. High-strength silicone hose with integrated HKS valve installs easily in place of OEM elbow joint. Includes high quality HKS Super SQV (Super Sequential Blow-off Valve) that features unique sequential valve structure and a differential pressure control system, allowing for a broad operation boost range. Also includes vacuum line and fittings necessary for installation on SVHO & SHO engines. A simple and cost effective upgrade for both stock and modified engines.

RIVA REAR EXHAUST 2019+ FX
RY15120 $399.95

Riva's rear exhaust kit delivers performance and cutting-edge style. Allows for removal of restrictive sound suppression system located between water box and hull exit. Improves engine performance by reducing back pressure and restriction. Includes mandrel bent aluminum exhaust tube that is powder coated to prevent corrosion, large billet through-hull exhaust outlet, billet OEM exhaust outlet block-off and high-temp silicone couplers along with all necessary mounting hardware & installation instructions.

Fits 2019 & newer FX-SHO, FX SVHO & FX-HO (NA) models only.

RIVA REAR EXHAUST FZR / FZS
RY15050 $339.95

RIVA SPEED CONTROL OVERRIDE MODULE 2015+
RY11080-SCOM $249.95
  • Removes restrictive speed limiter system.
  • Increases top speed utilizing stock ECU.
  • Delivers 3~4mph with no additional modifications.
  • Allows further top speed gains through aftermarket modifications.
  • All original dash functions are retained.
  • Does not interfere with speedometer functionality.
  • Easy plug-in installation.

Applications: Yamaha FZR/FZS SVHO models only.


RIVA SUPERCHARGER SHAFT UPGRADE KIT
RY17040-UK-6S5-3 $499.95
 
Riva's Super-Duty ‘GEN-3’ Supercharger Shaft Kit provides the ultimate in reliability for high boost applications. Kit features a revolutionary hydraulic shaft stabilization bearing that limits shaft deflection and wear. Bearing stabilizes end of supercharger shaft via high pressure oil film dramatically increasing the stability of the system. Hydraulic end bearing and one-piece shaft bearing are fed by a through-shaft oiling system providing superior lubrication. Oil is delivered by braided stainless line and injected into a billet end cap that houses hydraulic bearing. Shaft is precision machined from a single piece of high-strength billet steel producing shaft, collar & gear as one piece. This eliminates the common failure point on stock shafts where OEM gear is pressed onto shaft. Shaft also features larger diameter threads & nut for added strength. Kit includes new one piece bearing with increased surface area providing improved torsional stability of shaft. Bearing features superior materials & finish treatment for reduced friction & abrasion resistance. This Shaft & Bearing Kit is a direct replacement for OEM parts and requires no additional modifications for use.

RIVA THERMOSTAT DELETE KIT
RY1013-40-TR $22.95
 
Allows Yamaha SVHO, SHO & HO engines to run cooler by replacing the thermostat with a specialized restrictor. Ideal for modified watercraft operating in high air & water temperatures. Designed to be used with RIVA Engine Cooling Upgrade Kits. Precision machined restrictor includes o-ring system for superior sealing in thermostat housing. Includes complete installation instructions.

   
SBT IMPELLER HOUSING
78-412-01 $262.85

SBT IMPELLER HOUSING INSERT
78-412-02 $41.85
 
Replacement insert for SBT Impeller Housing 78-412-01

SOLAS DRIVESHAFT HOLDER
WR014H $29.95

Required tool when removing impeller from driveshaft
.

SOLAS CONCORD IMPELLER
YV-CD-13/18 $316.95
YV-CD-13/20 $316.95
YV-CD-14/21 $316.95

SOLAS IMPELLER HOUSING STAINLESS
YVS-HS-160 $429.95

SOLAS IMPELLER TOOL
WR014 $16.95

SOLAS IMPELLER TOOL
WR014A $16.95
  
For new YV & YS impellers requiring larger tool
Some hubs may be marked with an "A" in red

SLP FLOW-RITE INTAKE KITS
14-197 $24.95
 2"
14-258 $47.95 4"

Eliminate air intake restrictions by installing the Flow-Rite™ in the the intake tract for more air box feed or anywhere on the body where more air is required. The Flow-Rite™ is supplied with a pre-filter that repels water, yet passes air right through. A must for modified engines. Sold per each.

THREEBOND SILICONE LIQUID GASKET
TB1211 $23.95

TDR WATERBOX
02-0085 $295.00

TRAIL TECH TTO TACH-HOUR METER
742-A00 $44.95 Black
  
The surface mounted TTO Digital tach-hour meter allows you to easily monitor RPM and hours of use.

TRAIL TECH TTO TEMPERATURE METER
742-EH1 $49.95 Black
  
Monitor your engine coolant temperature.
A "must-have" for modified watercraft.

WET WOLF ADJUST-A-THRUST PUMP CONE
YAM5 $169.00
  
2014+ 160mm pump 4-bolt cone

WORX BILLET ENGINE COUPLER
WR04003 $382.00
  • Billet Drive coupler for Yamaha 1.8 Engine
  • Fits any 1.8 Yamaha Engine
  • Billet construction huge strength upgrade over stock cast unit
  • Utilises OEM rubber coupler
  • A must for any High Horsepower/ Race watercraft

   
   
WORX THROUGH HULL FITTING 1/2 INCH
WR06004 $27.00
 
Allows for easy installation of extra 1/2 inch cooling lines.

   
   
   
YAMAHA OIL FILTER
69J-13440-03-00 $24.00

YUASA BATTERY
YB16CL-B $73.95
  • Only Yuasa has Yumicron, the most powerful lead-acid battery of its size that appears as original equipment on more and more watercraft
  • All Yumicron batteries are shipped dry ( Acid not included )

YUASA BATTERY
YTX20HL-BS-PW $119.95
  • HIGH PERFORMANCE AGM MAINTENANCE-FREE
  • This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power
  • Additional cranking amps make these one of the most powerful batteries on the market
  • Acid Pak included ( Contintal USA Ground Shipping Only )

YUASA BATTERY
YTX20HL-PW $119.95
  • HIGH PERFORMANCE AGM MAINTENANCE-FREE
  • This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power
  • Additional cranking amps make these one of the most powerful batteries on the market
  • Factory Activated ( Continental USA Ground Shipping Only )